Hot Metal Harley-Davidson

Owning a Harley is a commitment. In order to make the most out of your time with your new Harley, you need to take the proper steps for maintenance. Here at Hot Metal Harley-Davidson, we offer bad credit Harley Davidson Loans PA. If you already have your Harley and need to learn how to change your tires, this page will help you out.

Is it Easy to Maintain a Harley?

As a general rule of thumb, Harleys are just as easy to maintain, if not easier, than a typical motorcycle from other brands. See here what kind of Harley’s we sell at Hot Metal Harley-Davidson.

One of the most common things you need to do with a Harley, though, is changing your tires. Below, we will break down how this is done!

How to Change a Motorcycle Tire: What You Need

· Valve Core Tool

· Tire Irons

· Windex

· Breezer Tire Tool

· Bead Breaker

· Air Pump

Step 1:Deflate and Remove Old Tire

To start off, what you need to do is use a valve core tool to deflate all of the air out of the tire. Make sure to note which way the tire is supposed to run so you are prepared to install the new one properly. Use the bead breaker to remove the tire from the old tire from the rim.

Step 2: Lubricate and Prepare the New Tire

At this point, we are now ready to install the new tire. The first thing you need to do now is to take your Windex and spray it across the inner walls of your new tire. This will act as a lubricant for the new tire.

Step 3: Install the New Tire to the Rim

Your new tire should have a red dot which indicates the position where you install the tire. The dot should align with your air valve when installed. In addition, make sure that the spin direction matches what you had on the old tire.

Step 4:Use Tire Irons to Evenly Install the New Tire

If you aren’t careful, you can break your rim or new tire during this step. Carefully use tire irons to pry the new tire perfectly in place. Once you think you have everything ready, inflate the tire a little bit until you hear a pop. This pop indicates that the bead has been installed.

Step 5:Fully Inflate and Mount

At this point, you have most of the hard work done. All you need to do now is inflate the tire to the factory-recommended PSI settings and mount the tire in place using the same steps you did to remove the tire in reverse!

Need some help changing your motorcycle's tires? Come into Hot Metal Harley-Davidson and have one of our mechanics do it for you!

Original Source: http://bit.ly/2s0F4k2